Stainless Steel wire: Standing rigging sets - Mirror dinghy set 2.5mm
Add to bag
Mirror dinghy standing rigging set made with Ormiston stainless steel firm (1 x 19 strand) wire at 2.5mm, has the following features:
- 1 x forestay (hard eye - soft eye) length:3100mm
- 2 x shroud (hard eye - soft eye) length:3300mm
Please check your measurements. If you think your rigging may not be standard, we need your measurements. The length measurement should be from the inner eye to inner eye (bearing edge to bearing edge - see image). Alternatively you could send us your old rigging and we'll copy it and return it to you if required.
If you require a jib halyard strop with block, these are sold separately.
Please note: Because this item is made to specification it is non refundable, so please double check your measurements.